Tag Archives: Tiny Arduino

Tiny Arcade is the world’s smallest arcade cabinet

Tiny Arcade lets you relive the golden age of video games with an arcade cabinet that fits in the palm of your hand.  

The golden age of arcade video games spanned from the late 1970s to the mid-1990s. During that time period, these machines became fixtures in ice cream shops, bowling alleys and bars throughout the world. However, it wasn’t before long that this form of entertainment suffered a decrease in popularity with the advent of home-based gaming consoles.


Truth be told, there’s nothing quite like the experience of playing a game in an arcade. And so, Ken Burns and the Tiny Circuits team decided to relive those glory days by shrinking a cabinet down to just a few inches tall.

The aptly named Tiny Arcade lets you play a number of retro-inspired games, each of which can be downloaded completely free online. Its creators hope to have over 20 classics available when the unit begins to ship, and being open source, you’ll be able to develop and release your own as well. What’s more, the palm-sized device allows you to convert any MP4 movie using a free utility to the TinyScreen format, put them on a microSD card, plug it in and then watch your video at 30 FPS with sound.


The gadget is based on the TinyScreen+ — an Arduino-compatible board that features an ATSAMD21G18A 32-bit MCU, built-in USB for charging and reprogramming, and an OLED screen all crammed into a package no larger than a quarter. Aside from that, there’s an analog joystick and two push buttons for playing the games, an integrated speaker for audio, a 140mAh lithium battery, and a microSD expansion slot.

“Even though the Tiny Arcade is built around the Arduino platform, don’t worry if you’re not a programmer. There is no need to download any special software or do any soldering with the Tiny Arcade, you can use it without any special knowledge,” Burns explains. “The Tiny Arcade can load games on the fly off a microSD card, a menu is provided at power up that shows a preview of all of the games available on the microSD card, choose one and it gets loaded in a second and you’re playing away. No need to reprogram the Tiny Arcade over USB.”


Tiny Arcade comes in two forms: either fully-assembled or in a DIY kit. The latter can be easily built in a matter of 10 minutes — no soldering or special tools necessary. The circuit boards snap together, while its acrylic or 3D-printed enclosure can be assembled like a jigsaw puzzle. There’s also a basswood case, which unlike the others, will need to be glued.

Those wishing to decorate their cabinets can do so with the two sheets of stickers included with each kit. Just peel them off and affix them to your Tiny Arcade, or print your own artwork for a more personal touch. You can even paint your own designs on the basswood model.

Ready for a retro arcade cabinet right in the palm of hand? Head over to Tiny Arcade’s Kickstarter campaign, where the Tiny Circuits crew is currently seeking $25,000. Delivery is expected to get underway in March 2016.

The tiniest ATtiny85 based ‘duino derivative ever

Did you know some tinyAVRs are so tiny that they can almost fit inside the ball of a ballpoint pen, or balance precariously on the tip of a matchstick? Well, it’s no secret the itsy-bitsy family possesses unparalleled size, but more impressively, without sacrificing performance and efficiency.

Over the past couple of years, as Makers took to Kickstarter to see who could possibly create the “world’s smallest Arduino,” it’s no surprise a majority turned to the super-small AVR.


As previously featured on Bits & Piecesthe Nanite — which measures 0.4” wide — is an uber-mini dev board built around an ATtiny85 MCU that boasts the same pin configuration as a DIP ATtiny85.

“As you can see below, the Nanite is very narrow, wasting no space on the breadboard. It is only 0.4″ wide in contrast to the 0.5″ or 0.6″ of the Trinket or Olimexino,” its creator Tim pointed out in pursuit of becoming the world’s smallest.


For a while, it was believed to be the smallest ‘duino derivative on the block. That was until a Maker by the name of Meizhu decided to up the ante. “When I first read about the Nanite 85 I knew I had to try to build my own. And it had to be even smaller.”

In an effort to devise a downsized replica of Tim’s brilliant Nanite 85 board, the shrunken version is still based on an ATtiny85 along with USB port, resistors, diodes, reset button, LED, and pin headers.

As Hackaday notes, “With a bit of work in KiCAD, the new board layout was created that is just a hair larger than the 0.4″ x 0.4″ footprint of the PDIP ATtiny85. There were a few challenges in getting a working board this small; you’d be surprised how large the plastic bits around pin headers are, but with some very crafty soldering, Meizhu was able to get it to work.”


Think you’re up for the challenge? Unfortunately, it appears that other than just the bare die of a ‘tiny85, there isn’t much hope of going any smaller. So, it looks like there’s a new champ in town. And, who said big things can’t come in (AT)tiny packages?