Tag Archives: Tektyte

Tektyte launches real-time circuit testers for USB and PoE-powered devices

Have you always wanted to diagnose your device while it was connected to a PC and transferring data? 

Thanks to the Melbourne-based team of Tektyte, you can. Their LogIT specialized circuit testers — which recently made their Kickstarter debut — provide a simple connection to the device being tested, while enabling data to pass through without interruption.


The idea for the LogIT came about after observing that in many cases a modern MCU-based system, like a phone or an Arduino, are powered by USB while connected to a PC that is also relaying information. To rectify that issue, the LogIT devices are specifically designed to measure the low positive voltages of USB and Power over Ethernet (PoE) connected equipment with high accuracy. The time between individual measurement data samples, obtained inside the LogIT, can be measured at either standard or custom intervals ranging from a millisecond to hours.

The series of devices is comprised of two unique circuit measurement tools, both displaying accurate readings of voltage, current, and power while also simultaneously logging all measurement data to a MicroSD card and/or PC. At the heart of the LogIT is a 32-bit Atmel | SMART ARM Cortex M0+ microcontroller, which consumes tiny amounts of power while still managing to synchronize numerous simultaneous interactions between peripherals such as the SD card, display, serial data port, and sensing system. At the moment, the team has embedded a SAM D20 in the USB version, with plans of implementing the SAM D21 for DMA firmware features.

“Using a gutsy little processor has enabled the LogIT to support the writing of standard CSV formatted data to SD card with files sizes only limited by the SD card capacity. If you wish to log over 2GB of power, voltage, and current data in a single recording, potentially stretching for weeks, then a LogIT will help you achieve this.”


“We have worked diligently to create a device which not only connects to a PC, but can also be operated as a standalone logger with a battery life of up to a week for fast recording rates and continuous measurement display. This is achieved by incorporating a large lithium polymer battery and one of the latest high speed/low power display technologies called Memory LCD,” a company rep explains.

Equipped with a 96 x 96 pixel dot-matrix display, the LogIT allows for the measurements to be represented in both numerical and graphical format simultaneously. Meanwhile, each device is packed with a real-time clock, ensuring that all the collected data is accurately time stamped. The time can be synchronized to the connected PC, or manually set. According to the team, both devices sport a number of additional features including:

  • Full isolation between the measurement ports and the test data USB/Serial ports
  • An open protocol for serial data streaming in both event and continuous modes
  • Screw terminals so that you can wire the LogIT directly into a circuit and test a wider range of voltages
  • Visual and audible buzzer alarm capabilities for indication of events set as thresholds by the user for current, voltage, or power
  • A low voltage serial port connector for direct connection to a DIY embedded devices such as an Arduino or Raspberry Pi


Additionally, users can download its free desktop application, which is coded in Java so that both Mac and PC users can connect, graph, and download data from the LogIT devices. Interested in learning more? Head on over to the project’s official Kickstarter page here, where the team has already exceeded its initial $7,500 pledge goal.