mbed eval boards showcase focus on IoT software and connectivity

---

Chipmakers like Atmel are joining hands with ARM to bring the entire ecosystem under one roof and thus facilitate the creation of standards-based IoT products.

---

ARM’s mbed operating system is winning attention in the highly fragmented embedded software space by promising a solid software foundation for interoperable hardware and thus scale the Internet of Things designs by narrowing the development time.

Atmel has put its weight behind ARM’s mbed OS by launching the single-chip evaluation board for the IoT ecosystem in a bid to ensure low software dependence for the embedded developers. The leading microcontroller supplier unveiled the mbed evaluation platform at the recent ARM TechCon held in Santa Clara, California.

The mbed OS platform is focused on rapid development of connected devices with an aim to create a serious professional platform to prototype IoT applications. So IoT developers don’t have to look to software guys for help. The mbed stack features a strong focus on enhancing the IoT’s connectivity and software components.

ARM is the lead maintainer for the mbed OS modules while it adds silicon partners, like Atmel, as platform-specific dependencies for the relevant mbed OS modules. Silicon partners are responsible for their platform-specific drivers.

Atmel’s mbed-enabled evaluation board is based on the low-power 2.4GHz wireless Cortex-M0+ SAM R21 MCU. Moreover, Atmel is expanding mbed OS support for its Wi-Fi modules and Bluetooth Low Energy products.

The fact that Atmel is adding mbed OS to its IoT ecosystem is an important nod for ARM’s mbed technology in its journey from merely a hardware abstraction layer to a full-fledged IoT platform. Atmel managers acknowledge that mbed technology adds diversity to embedded hardware devices and makes MCUs more capable.

Solid Software Foundation

There is a lot of code involved in the IoT applications and software is getting more complex. It encompasses, for instance, sensor library to acquire data, authentication at IoT gateways and SSL security. Here, the automatic software integration engine like mbed lets developers focus on their applications instead of worrying about integrating off-the-shelf software.

The mbed reference designs like the one showcased by Atmel during ARM TechCon are aimed at narrowing the development time with the availability of building blocks and design resources—components, code and infrastructure—needed to bootstrap a working IoT system. Atmel managers are confident that a quality software foundation like mbed could help bring IoT products to market faster.

Atmel’s mbed-enabled IoT evaluation board promises harmony between hardware and software. Apparently, chipmakers like Atmel are joining hands with ARM to bring the entire ecosystem — OS software, cloud services and developer tools — under one roof, and thus facilitate the creation of standards-based IoT products. Atmel’s mbed evaluation board clearly mirrors that effort to deliver a complete hardware, software and developer tools ecosystem in order to bring IoT designs quicker to market.

The platform comprises of mbed OS software for IoT client devices like gateways and mbed Device Server for the cloud services. ARM launched the mbed software platform in 2014 and Atmel has been part of this initiative since then.

mbed in Communications Stack

Additionally, Atmel has tied the mbed association to its SmartConnect wireless solutions to make the best of mbed’s networking stack in the Internet of connected things. The IoT technology is built on layers, and here, interoperability of communications protocols is a key challenge.

For a start, Atmel’s SAM R21-Xpro evaluation board is embed-enabled and is built around the R21 microcontroller, which has been designed for industrial and consumer wireless applications running proprietary communication stacks or IEEE 802.15.4-compliant solutions.

Next up, the evaluation board includes SAM W25 Wi-Fi module that integrates IEEE 802.11 b/g/n IoT network controller with the existing MCU solution, SAM D21, which is also based on the Cortex-M0+ processor core.

Furthermore, Atmel is offering an mbed-enabled Bluetooth starter kit that includes SAM L21 microcontroller-based evaluation board and ultra-low-power Bluetooth chip BTLC1000, which is compliant with Bluetooth Low Energy 4.1. Atmel demonstrated a home lighting system at the ARM TechCon show floor, which employed SAM R21-based Thread routers that passed light sensor information to an mbed-enabled home gateway. Subsequently, this information was processed and sent to the mbed Device Server using a web interface.

---

Majeed Ahmad is the author of books Smartphone: Mobile Revolution at the Crossroads of Communications, Computing and Consumer Electronics and The Next Web of 50 Billion Devices: Mobile Internet’s Past, Present and Future.

Atmel and IoT and Crypto, oh my!

One of the companies that is best positioned to supply components into the Internet of Things (IoT) market is Atmel. For the time being most designs will be done using standard components, not doing massive integration on an SoC targeted at a specific market. The biggest issue in the early stage of market development will be working out what the customer wants and so the big premium will be on getting to market early and iterating fast, not premature cost optimization for a market that might not be big enough to support the design/NRE of a custom design.

Here is Atmel’s latest product in the SmartConnect family, the SAM W25 module

Atmel has microcontrollers, literally over 500 different flavors and in two families, the AVR family and a broad selection of ARM microcontrollers ad processors. They have wireless connectivity. They have strong solutions in security.

Indeed last week at Electronica in Germany they announced the latest product in the SmartConnect family, the SAM W25 module. It is the industry’s first fully-integrated FCC-certified Wi-Fi module with a standalone MCU and hardware security from a single source. The module is tiny, not much larger than a penny. The module includes Atmel’s recently-announced 2.4GHz IEEE 802.11 b/g/n Wi-Fi WINC1500, along with an Atmel | SMART SAM D21 ARM Cortex M0+-based MCU and Atmel’s ATECC108A optimized CryptoAuthentication engine with ultra-secure hardware-based key storage for secure connectivity.

Atmel at Electronica 2014

That last item is a key component for many IoT designs. Security is going to be a big thing and with so many well-publicized breaches of software security, the algorithms, and particularly the keys, are moving quickly into hardware. That component, the ATECC108A, provides state-of-the-art hardware security including a full turnkey Elliptic Curve Digital Signature Algorithm (ECDSA) engine using key sizes of 256 or 283 bits – appropriate for modern security environments without the long computation delay typical of software solutions. Access to the device is through a standard I²C Interface at speeds up to 1Mb/sec. It is compatible with standard Serial EEPROM I²C Interface specifications. Compared to software, the device is:

• Higher performance (faster encryption)
• Lower power
• Much harder to compromise

Atmel has a new white paper out, Integrating the Internet of Things, Necessary Building Blocks for Broad Market Adoption. Depending on whose numbers you believe, there will be 50 billion IoT edge devices connected by 2020.

Edge nodes are becoming integrated into everyone’s life

As it says in the white paper:

On first inspection, the requirements of an IoT edge device appear to be much the same as any other microcontroller (MCU) based development project. You have one or more sensors that are read by an MCU, the data may then be processed locally prior to sending it off to another application or causing another event to occur such as turning on a motor. However, there are decisions to be made regarding how to communicate with these other applications. Wired, wireless, and power line communication (PLC) are the usual options. But, then you have to consider that many IoT devices are going to be battery powered, which means that their power consumption needs to be kept as low as possible to prolong battery life. The complexities deepen when you consider the security implications of a connected device as well. And that’s not just security of data being transferred, but also ensuring your device can’t be cloned and that it does not allow unauthorized applications to run on it.

IoT design requirements: Software / development tools ecosystem

For almost any application, the building blocks for an IoT edge node are the same:

• Embedded processing
• Sensors
• Connectivity
• Security
• And while not really a “building block,” ultra-low power for always-on applications

My view is that the biggest of these issues will be security. After all, even though Atmel has hundreds of different microcontrollers and microprocessors, there are plenty of other suppliers. Same goes for connectivity solutions. But strong cryptographhic solutions implemented in hardware are much less common.

The new IoT white paper is available for download here.

This post has been republished with permission from SemiWiki.com, where Paul McLellan is a featured blogger. It first appeared there on November 19, 2014.

The Internet of Things and energy conservation

Humans are creative, and adaptive. We’ve done it all our lives, and all our existence. We needed more food, and so we created agriculture. We needed to live together, and so we created architecture. We needed to communicate, and so we created hundreds of ways to do just that; Internet, mobile telephone networks, computers. We are so fond of computers that we have them everywhere, often without noticing them. Yes, you might have a bulky desktop computer at home, or maybe even a flashy new laptop, but those are not the only computers. Your mobile telephone is a computer, but technically, so is your microwave, your car, your television set, and even your washing machine.

Our lives have changed greatly. We’ve all seen pictures and even films of medieval castles, and we know how we used to live. Today, our lives are made more comfortable by scores of machines; when was the last time you washed your clothes by hand? The clothes go in the washing machine, then in the dryer, and then in the cupboard. This all comes at a cost; financially, of course, but also in terms of energy.

Energy. The art of creating electrical power and delivering it to our homes and cities. For most people, this is as simple as having overhead power lines here and there, and paying a bill at the end of the month. Unfortunately, it is much more complicated than that. Power stations require scores of people to operate, and something surprising, data. In France, we have “too many” power stations, and most run at low capacity. When it gets hot, those who have air conditioning like to put it on, consuming electricity. Multiply that by a few thousand, and you get an idea of how much energy the power station needs to produce. When it gets cold, people like to heat their homes and businesses, and since everyone has radiators, electrical consumption soars. Imagine the amount of radiators an entire city can contain, and imagine even 50% of them turned on at the same time. Imagine.

Data is needed from other sources, not just from the weather. Imagine the amount of power required to let all the football fans watch the world cup. Our problem is that we can generate electricity, but we cannot store it (at least, not on this kind of scale). When everything gets turned on, the power station must be able to respond. If it can’t, bad things happen; the lights dim, or sometimes everything goes dark. We now know we cannot live without electricity.

We all know that we need to reduce our energy dependence, even if some of us don’t want to. To make more people aware, some cities turn off all the lights for an hour. It’s called Earth Hour. For one hour, people are encouraged to use as little electricity as possible; turning off the lights, for example. This does have an impact, but it is a double-edged sword. For one hour, the electricity usage drops considerably, while everyone thinks about the planet, and what we will leave behind for our children. At the end of the hour, everything goes back on, and this is where things get tricky. When electrical devices are first turned on, some can generate what is called an energy spike; a large consumption at first, before something more stable. It is visible just after Earth Hour, but it actually happens every day.

Peak hours. In my house, my electric water heater is connected to a peak-hour detection system. At 11:30 PM, my electricity provider starts “off-peak” hours, a time where electricity costs less. It costs less, an incentive to make me use power-hungry devices at a time when other devices are not needed. At this time of night, most businesses are closed, and so there is less demand. It is all about normalizing energy requirements, and to stop peaks during the day. At 7:30 AM, peak hours start, the water heater turns off, businesses start up, and my kettle turns on, the day is about to begin.

Energy is available, that isn’t the problem. Our problem is our use of energy. If only we had a way of using energy when it was available. Imagine, a certain amount of energy available. When I need light, I want my light to be usable immediately. I need a start time; now. However, when I put my clothes in the washing machine generally, I need them to be ready for the next day. I need and “end” time; I need the device to get the work done before a certain time. When will the washing machine start? Well, I don’t actually mind when it starts, and this is where I need help. This is where the IoT can help us, because we really need help.

The IoT will give us millions of connected sensors. This will also supply us with data, lots and lots of it. Why wouldn’t a small device in my house have direct control over my washing machine, or even better, actually be inside my washing machine? It could be programmed to start at a specific time, talking to other devices on the energy grid? Or even in my home; it could tell the water heater to wait until it has finished, and then the water heater gets its chance. The possibilities are endless.

IoT will give us an incredible amount of data, and data that can be used to help up control, and maybe even overcome our need to energy. But wait a minute, doesn’t the IoT itself need energy? It does, but the amount of energy that it will save outweighs the amount of energy it uses, and by a large factor. Take, for example, Atmel’s SAM D21 microcontroller. It uses less than 70µA per MHz, and that is when it is running at full speed. Of course, these devices have advanced power management, and with careful coding, they can last for months on cell batteries. Low power does not mean no power; it has enough flex to get the job done, and more. With built-in USB, ADCs, DACs and enough RAM and ROM for the most complex programs, it gets the job done. It also has the Atmel Event system, a powerful system that lets the microcontroller react to external events without the need to constantly look at inputs.

We need a little help in our lives to make simple decisions; when should I turn the heating on? When is the best time to turn on the air conditioner? We think we know, but we don’t. IoT will allow us to know exactly when the cold weather is coming. IoT will know when to turn the lights off. In short, IoT will generate enough data that it will know better than us what to do, and when. What we have seen so far is only the beginning.

Who’s talking about the Arduino Zero ?

The Atmel-powered Arduino Zero dev board was officially announced on May 15th, 2014. The board’s debut has already been covered by a number of prominent tech publications, including Ars Technica, HackADay, EE Times, Electronics Weekly, CNX Software, UberGizmo, Geeky Gadgets, SlashGear, PC World, SemiWiki and Makezine.

Sean Gallagher, Ars Technica



“The Zero is a 32-bit extension of Arduino’s flagship Uno board, developed jointly by the Arduino team and Atmel, targeted at helping developers prototype smart devices. Based on the Atmel SAM D21 ARM Cortex-based microcontroller, the Zero includes Amtel’s Embedded Debugger—allowing developers to debug their projects without having to wire up another interface.

”

“It gives developers a huge boost in storage and memory over the Uno, providing 256KB of onboard Flash storage (compared to the Uno’s 32KB) and 32KB of static RAM (compared to the Uno’s 2KB). It can also emulate an Electronically Erasable Programmable Read-Only Memory (EEPROM) of up to 168KB, while the Uno only supported 1KB of EEPROM.”

Brian Benchoff, HackADay

“The Arduino Zero uses an Atmel ARM Cortex-M0+ for 256kB of Flash and 32k of RAM. The board supports Atmel’s Embedded Debugger, finally giving the smaller Arduino boards debugging support.

“The chip powering the Zero features six communications modules, configurable as a UART, I2C, or SPI. USB device and host are also implemented on the chip [and] there are two USB connectors on the board.”

Max Maxfield, EE Times



“I’ve become a huge supporter of the Arduino, from the concept to the hardware to the software (IDE) to the ecosystem. I’m now using Arduinos and Arduino-compatible platforms for all sorts of projects, including my Infinity Mirror, my Inamorata Prognostication Engine and my BADASS Display.

“Each Arduino and Arduino-compatible platform offers different features, functions, capacities, and capabilities, which makes it possible to select the optimal platform for the project at hand using criteria such as size, cost, performance, and number of input/output pins. As of this morning, there’s a new kid on the block – the Arduino Zero, which has been jointly developed by Atmel and Arduino.”

Alasdair Allan, MakeZine

“While it shares the same form factor as the Arduino Leonardo—with 14 digital and 5 analog pins—all of the digital pins except the Rx/Tx pins can act as PWM pins, and the analog pins have a 12-bit ADC instead of the Leonardo’s 10-bit ADC, giving significantly better analog resolution,” writes Makezine’s Alasdair Allan.

“The new board comes with 256KB of Flash memory, and 32KB of SRAM. While the new board doesn’t have EEPROM, it does support 16KB by emulation, so Arduino sketches relying on this feature will still run without issue.”

Arduino Zero – official specs:

• Microcontroller ATSAMD21G18, 48pins LQFP
• Operating voltage 3.3V
• Digital I/O Pins 14, with 12 PWM and UART
• Analog input pins 6, including 5 12bits ADC channels and one 10 bits DAC
• DC current per I/O Pin 7 mA
• Flash memory 256 KB
• SRAM 32 KB
• EEPROM up to 16KB by emulation
• Clock speed 48 MHz

Interested in learning more? You can check out the official Arduino Zero page here.