Tag Archives: Modified 3D Printer

Artist modifies his 3D printer to paint with light


Maker attaches an RGB LED to his RepRap 3D printer to paint with lights.


Indian architect Ekaggrat Singh Kalsi has taken the practice of light painting into the third dimension by 3D printing with light. To accomplish this, the Maker has created a new system that swaps out filament for LEDs and captures the resulting print with long-exposure photographs.

paintingwithlight

Kalsi began by connecting a 5mm RGB LED to pins 4, 5, 6 on the RAMPS board of his AVR based 3DR Delta printer. With the LEDs attached to the working end of his machine, he was able to use light to trace a shape line by line. Though the object can’t be seen by the human eye while in progress, when combined with the time-lapsed camera, the end result is a floating, hologram-like image.

f9bb0b41a1e405910233370813b93ca6.jpg

Additionally, he programmed his NIKON D3100 camera so that it starts and stops automatically, preventing the need to hold down the shutter release button for extended periods of time. Using an Opto Isolator, he joined one of the RAMPS pins to the shutter release button, which enabled him to capture a 3D scan of his daughter’s face and then paint it with light.

GH_SCREEN_CONTOURS_preview_featured-1

Kalsi produced Gcode for all of the different angles of the face model, while the final results are built as a rotating GIF file of the scan. Beyond that, he wrote a custom Grasshopper 3D script that was capable taking any 3D model and converting it into Gcode. This script is tasked with controlling the path of the LED as well as turning the light source on/off.

Pretty sweet, huh? You’ll want to see it in action below!