Tag Archives: Micro

Which Arduino board is right for you?


Picking an Arduino is as easy as Uno, Due, Tre! 


Thinking about starting a project? See which Arduino board is right for the job.

Arduino Uno

This popular board — based on the ATmega328 MCU — features 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, USB connection, power jack, an ICSP header and a reset button.

ArduinoUno_r2_front450px

The Uno does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 up to version R2) programmed as a USB-to-serial converter.

In addition, Revision 3 of the Uno offers the following new features:

  • 
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. Note: The second is not a connected pin.
  • 
Stronger RESET circuit.
  • ATmega16U2 replace the 8U2.

Arduino Leonardo

The Arduino Leonardo is built around the versatile ATmega32U4. This board offers 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, microUSB connection, power jack, an ICSP header and a reset button.

300-xl

The Leonardo contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Plus, the ATmega32U4 offers built-in USB communication, eliminating the need for a secondary processor. This allows it to appear as a mouse and keyboard, in addition to being recognized as a virtual (CDC) serial / COM port.

Arduino Due

The Arduino Due is an MCU board based on the Atmel | SMART SAM3X8E ARM Cortex-M3 CPU.

ArduinoDue_Front

As the first Arduino built on a 32-bit ARM core microcontroller, Due boasts 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.

Unlike other Arduino boards, the Due runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin, could damage the board.

Arduino Yún

The Arduino Yún features an ATmega32U4, along with an Atheros AR9331 that supports a Linux distribution based on OpenWRT known as Linino.

ArduinoYunFront_2

The Yún has built-in Ethernet and Wi-Fi support, a USB-A port, a microSD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, microUSB connection, an ICSP header and 3 reset buttons. The Yún is also capable of communicating with the Linux distribution onboard, offering a powerful networked computer with the ease of Arduino.

In addition to Linux commands like cURL, Makers and engineers can write their own shell and python scripts for robust interactions. The Yún is similar to the Leonardo in that the ATmega32U4 offers USB communication, eliminating the need for a secondary processor. This enables the Yún to appear as a mouse and keyboard, in addition to being recognized as a virtual (CDC) serial?COM port.

Arduino Micro

Developed in conjunction with Adafruit, the Arduino Micro is powered by ATmega32U4.

The board is equipped 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, microUSB connection, a ICSP header and a reset button. The Micro includes everything needed to support the microcontroller; simply connect it to a computer with a microUSB cable to get started. The Micro even has a form factor that lets the device be easily placed on a breadboard.

Arduino Robot

The Arduino Robot is the very first official Arduino on wheels. The robot is equipped with two processors — one for each of its two boards.

Robot_Top

The motor board drives the motors, while the control board is tasked with reading sensors and determining how to operate. Each of the ATmega32u4 based units are fully-programmable using the Arduino IDE. More specifically, configuring the robot is similar to the process with the Arduino Leonardo, as both MCUs offer built-in USB communication, effectively eliminating the need for a secondary processor. This enables the Robot to appear to a connected computer as a virtual (CDC) serial?COM port.

Arduino Esplora

The Arduino Esplora is an ATmega32u4 powered microcontroller board derived from the Arduino Leonardo. It’s designed for Makers and DIY hobbyists who want to get up and running with Arduino without having to learn about the electronics first.

The Esplora features onboard sound and light outputs, along with several input sensors, including a joystick, slider, temperature sensor, accelerometer, microphone and a light sensor. It also has the potential to expand its capabilities with two Tinkerkit input and output connectors, along with a socket for a color TFT LCD screen.

Arduino Mega (2560)

The Arduino Mega features an ATmega2560 at its heart.

It is packed with 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, USB connection, a power jack, an ICSP header and a reset button. Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

Arduino Mini

Originally based on the ATmega168, and now equipped with the ATmega328, the Arduino Mini is intended for use on breadboards and projects where space is at a premium.

Mini05_front

The board is loaded with 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs and a 16 MHz crystal oscillator. It can be programmed with the USB Serial adapter, the other USB, or the RS232 to TTL serial adapter.

Arduino LilyPad

The LilyPad Arduino is designed specifically for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.

The board is based on the ATmega168V (the low-power version of the ATmega168) or the ATmega328V. The LilyPad Arduino was designed and developed by Leah Buechley and SparkFun Electronics. Readers may also want to check out the LilyPad Simple, LilyPad USB and the LilyPad SimpleSnap.

Arduino Nano

The Arduino Nano is a tiny, complete and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x).

The Nano has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. The board is designed and produced by Gravitech.

Arduino Pro Mini

Powered by an ATmega328, the Arduino Pro Mini is equipped with 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button and some holes for mounting pin headers.

50720-11114-02

A 6-pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board. Note: See also Arduino Pro.

Arduino Fio

The Arduino Fio (V3) is a microcontroller board based on Atmel’s ATmega32U4. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button and holes for mounting pin headers. It also offers connections for a lithium polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board.

The Arduino Fio is intended for wireless applications. The user can upload sketches with an a FTDI cable or Sparkfun breakout board. Additionally, by using a modified USB-to-XBee adaptor such as XBee Explorer USB, the user can upload sketches wirelessly. The board comes without pre-mounted headers, facilitating the use of various types of connectors or direct soldering of wires. The Arduino Fio was designed by Shigeru Kobayashi and SparkFun Electronics.

Arduino Zero

Last year, the tandem of Atmel and Arduino debuted the Zero development board – a simple, elegant and powerful 32-bit extension of the platform. The Arduino Zero board packs an Atmel | SMART SAM D21 MCU, which features an ARM Cortex M0+ core. Additional key hardware specs include 256KB of Flash, 32KB SRAM in a TQFP package and compatibility with 3.3V shields that conform to the Arduino R3 layout.

Zero-Blog-1

The Arduino Zero boasts flexible peripherals along with Atmel’s Embedded Debugger (EDBG) – facilitating a full debug interface on the SAMD21 without the need for supplemental hardware. Beyond that, EDBG supports a virtual COM port that can be used for device programming and traditional Arduino bootloader functionality. This highly-anticipated board will be available for purchase from the Arduino Store in the U.S. on Monday June 15th.

Arduino AtHeart

The Arduino AtHeart program was specifically launched for Makers and companies with products based on the open-source board that would like to be clearly identified as supporters of the versatile platform. The program is available for any device that includes a processor that is currently supported by the Arduino IDE, including the following Atmel MCUs:

Participants in the program include startups like:

EarthMake – ArLCD

The touchscreen ArLCD combines the ezLCD SmartLCD GPU with the Arduino Uno.

ee9bedf0de7441839ba219cb9df9f51a.image.446x354

Bare Conductive Touch Board

The ATmega32U4 based Touch Board can turn nearly any material or surface into a sensor by connecting it to one of its 12 electrodes, using conductive paint or anything conductive.

0f334dab601135bf329b68c8aee984f3.image.538x354

Blend Micro

The RedBearLab integrated dev platform “blends” the powers of Arduino with Bluetooth 4.0 Low Energy into a single board. It is targeted for Makers looking to develop low-power IoT projects in a quick, easy and efficient manner. The MCU is driven by an ATmega32U4 and a Nordic nRF8001 BLE chip.

14627c6f2dffee59911a21ede7a71a9a.image.447x354

littleBits Arduino Module

The fan-favorite Arduino module, which happens to also be based on an ATmega32U4, lets users easily write programs in the Arduino IDE to read sensors and control lights and motors within the littleBits system.

arduino_withlogo

Smart Citizen Kit

An Arduino-compatible motherboard with sensors that measure air composition (CO and NO2), temperature, light intensity, sound levels, and humidity. Once configured, the Smart Citizen Kit is capable of streaming data collected by the sensors over Wi-Fi.

8913f25184f084d52da77d70f5261203_large

Video: Building a smart cocktail shaker

Adafruit’s Tony DiCola has created a smart cocktail shaker capable of dispensing classy drinks with nothing less than accurate precision.

“The smart cocktail shaker is a project to help you easily mix drinks using an Arduino, a load cell from a cheap kitchen scale and an Android application,” DiCola explained in a detailed Adafruit tutorial.

“By measuring the weight of a cocktail shaker, an Arduino can send the amount of poured liquid to an Android application over a USB or bluetooth connection in real time. Making a drink is as easy as following the steps on screen – no more guessing or fumbling with measurements.”

As HackADay’s Brian Benchoff notes, DiCola connected a INA125 instrument amplifier to the load cell, instead of trying to interface with the electronics in the scale.

“[Meanwhile] an [Atmel-based] Arduino Micro (ATmega32u4) measures the weight on the load cell… With the known densities of gin, vermouth and Kahlua, Tony can get a very good idea of how much liquid is in the cocktail shaker.”

On the software side, Tony wrote an Android app for his tablet that communicates with the Arduino via Adafruit’s Bluefruit adapter.

“The app receives the current weight on the load cell, displays the current amount of liquor in the cocktail shaker and provides step-by-step instructions for making any cocktail,” Benchoff added.

Interested in learning more? You can check out Adafruit’s detailed build tutorial here.

Dual Arduino Micro XPlorerBoard hits Kickstarter



Rich Electronics has debuted the XPlorerBoard, a portable platform that allows Makers to easily plug in two Atmel-powered Arduino Micro boards (ATmega32u4 MCU) and eliminate loose parts with integrated components.

“The XPlorerBoard is specifically designed for portability and durability. We designed the whole board with through hole components because they do not pop off the board like surface mount components,” a Rich Electronics rep explained in a recent Kickstarter post.

“The back of the XPlorerBoard is covered with a protective anti-static material that also covers all the leads. All of this fits in an included binder with a pocket full of hookup wires to get you started.”

Key project components include:

  • Two Arduino Micro sockets (all pins available in an easy to access header)
  • 5 Volt and 3.3 Volt power supply with included AC adapter
  • Two line by 16 character serial display with multicolored back light
  • Arduino serial library
8 directional switches
  • Piezo buzzer for sound
  • Light sensitive photo resistor
  • Resistor bank
  • Red and green 10 segment LED bar graphs
  • 
Bi-directional logic level converters
  • 
Logic gates
  • 
Two 10K ohm potentiometers (variable resistors)
  • Extra large breadboard for additional components
  • Capacitors
  • N-Channel Mosfet to control high current loads
  • One Binder with parts pocket
  • 100 jumper wires

Interested in learning more? You can check out the project’s official page here.

Creating a custom car keypad entry with Arduino

Eddie Zarrick wasn’t a big fan of hiding the key to his Jeep Wrangler every time he hiked around the great outdoors and went for a swim. So he decided to build an Arduino-based keypad entry for the trusty Wrangler.

“I went to a river this weekend for a swim and realized that I had no way to lock my jeep up without hiding my key through my back soft window and fetching it after to unlock the Jeep,” Zarrick explains in a Wrangler forum post. “If I can do that, so can anyone that was watching me hide my key! Then my friend showed me how his ‘super cool SUV’ had a keypad for keyless entry.”

As the HackADay crew notes, the above-mentioned project uses a spare waterproof keypad attached to an Atmel-powered Arduino Micro.

“Zarrick simplified things by cannibalizing his extra keyless entry keyfob; if the ‘duino receives the right code from the keypad, it presses the unlock button on the keyfob to grant access,” writes HackADay’s Josh Marsh. “Zarrick admits that the Wrangler’s soft top is easy enough to get into, but explains that the goal of this project is to keep the alarm activated, which would presumably go off if someone tried to break in through the soft top.”

Interested in learning more about creating a custom car keypad with an Atmel-powered Arduino? Be sure to check out the video above and the Wrangler forum post by Zarrick here.