Kickstarter first opened its virtual doors on April 28, 2009. Since then, the wildly popular crowdfunding website has tracked over $1 billion in pledges from 5.9 million individuals who actively funded 59,000 creative projects.
Unsurprisingly, quite a number of Atmel-powered Kickstarter projects have been successfully funded over the past year, including:
MicroView is a chip-sized platform with a built-in OLED (64×48) display that allows Makers to see what the Atmel-based board is “thinking” without having to link with a PC.
The device, designed by the Geek Ammo crew, is built around Atmel’s versatile ATmega328P microcontroller (MCU).
Essentially, 1Sheeld connects to a mobile Android app that allows users to take advantage of various smartphone features including the display, gyroscope, accelerometer, magnetometer, GSM, Wi-Fi and GPS.
Designed by Pensa Labs, the DIWire transforms drawn curves into bent wire that can be assembled to make just about anything.
Primo can best be described as a playful physical programming interface that helps teach children programming logic without the need for literacy.
Robox is a 3D printing and micro-manufacturing platform designed byC Enterprise Ltd. (CEL).
Simply put, the EX¹ is helping to transform electronics and prototyping in the same way that conventional 3D printing revolutionized traditional manufacturing.
Touch Board: Interactivity Everywhere
The Touch Board can change the world around you by turning almost any material or surface into a sensor.
Protected from digital intruders by Atmel’s ATSHA204 which offers 256-bit AES hardware encryption, Flutter makes it easy for DIY Makers to build projects that communicate across a house, neighborhood and beyond.
Essentially, Hex imitates the movement of the smartphone or a tablet in the air. In addition, traditional throttle, elevator, aileron, rudder control systems can be used to operate your Hex.
Designed by Ben Escobedo, the open source ATtiny85 ISP! can probably best be described as a breakout prototyping board for Atmel’s ATtiny85/45/25 lineup.
The project’s goal? Allowing Makers to take advantage of the ATtiny85 chip’s potential, while using the familiar Arduino IDE and harnessing the super awesome support from the Arduino community.
The next-gen smartwatch offers brand-new technology, world-class developer tools, unparalleled battery life and Qi wireless charging.
Additional key specs include 32KB Flash memory, 2.5KB RAM, 1KB EEPROM, a micro USB connector for power and data, as well as an on-board micro switch for interactive applications.
Made of laser-cut leather, the Atmel-powered, Arduino-based Edge is a wearable light that snaps securely onto your clothing with the help of four strong neodymium magnets.
You can wear it discreetly by day or brightly at night with your winter coat, cardigan, hood, scarf, handbag, collar, pocket, belt, or wherever you’d like a touch of light.
When it went live on Kickstarter, the Open Engima successfully raised over $62,000, facilitating the implementation of several important stretch goals.
Skirmos: Open Source Laser Tag
Skirmos currently offers a trio of preset gametypes: basic, free-for-all and team slayer. However, the platform is ultimately expected to boast an almost unlimited number of gametypes.
OSCAR: Open Screen Adapter
The board is Arduino compatible ,which makes modifying the behavior easy, as all the software and hardware is open source.
The DigiX was designed to be a dev board ready for any project – with no compromises.
Reactor Core – Arduino/AVR Programmer, DIY Soldering Kit
The Reactor Core is a hardware programming platform for Arduino boards and stand-alone AVR-based microcontrollers (MCUs).
Designed by Frank Fox, the Reactor Core is powered by Atmel’s ATmega328P MCU and an FT232R for USB to serial communication.
King’s Assembly Mouse
Solid Art Labs recently debuted the King’s Assembly – a unique device that packs a high-precision laser mouse, full mechanical keyboard and an analog joystick into a single platform.
Atmel’s AT90USB128 MCU powers this three-in-one mouse. Key features include 30 keys for each hand, finger key rows angled for fast access and a two-axis analog joystick for each thumb.
According to STEM Center USA CEO Melissa Jawaharlal, the team designed the Pi-Bot from the ground up to optimize functionality and ensure affordability.
Game Frame: The Art of Pixels
As Williams notes, video game artists used to draw everything with a sheet of graph paper, a few colors and a couple of animation frames.
Robot Army Starter Kit
The Robot Army is a DIY Delta Robot kit powered by Atmel’s versatile ATmega328 microcontroller for the rapidly growing Maker community.
The kit includes all mechanical pieces in grey and neon yellow plastic (the yellow fluoresces under black light), spacers, brackets, ball bearings and hardware required for assembly. In addition, the kit is packed with electronic components, PCB and wire harnesses.
MicroSlice: Mini Laser Cutter & Engraver
The MicroSlice is a mini laser cutter and engraver.
The open source platform, powered by an Atmel-based Arduino Uno (ATmega328), is currently being promoted as a kit that takes approximately 15 hours to build.
uARM: Miniature Industrial Robot
This four-axis parallel-mechanism desktop robot arm is modeled after the ABB industrial PalletPack robot and is built around Atmel’s ATmega328 MCU which powers a custom board.
The uARM platform is constructed with acrylic or wood parts and fitted with standard RC hobby servos.
Smart Nixie Tube
Designed by Tyler Nehowing, the platform is fully programmable using the unmodified Arduino IDE, as it appears as an Arduino Uno running at 16MHz/5V.
OpenBCI: An Open Source Brain-Computer Interface For Makers
OpenBCI – designed by Joel Murphy & Conor Russomanno – is a low-cost programmable open-source EEG platform that offers Makers easy access to their brainwaves. In addition to an ADS1299 IC, the OpenBCI is equipped with Atmel’s ATmega328 (+ Arduino’s latest bootloader).
The project’s vision? ”To realize the potential of the open-source movement to accelerate innovation in brain science through collaborative hardware and software development.”
White Bread Shield for Arduino
The Hauntbox is a prop controller and automation machine that is browser-configured and open source.
The ATmega2560-based platform allows Makers to easily automate inputs and outputs without the need for complex programming.
ControLeo – designed by two retired Silicon Valley engineers – can probably best be described as a quad relay controller enclosed in a professional box.
Aptly described as “electronic building blocks” by the GHI Electronics crew, the Fez Medusa is designed to keep soldering irons optional with a comprehensive ecosystem of mainboards, sensors and control modules.
Rapid IoT prototyping with SODAQ
The Atmel-based SODAQ (ATmega328P) is a LEGO-like, plug-in, rapid prototyping board.
Simply put, the multi-feature microprocessor board allows both Makers and engineers to easily connect a wide variety of sensors and devices to the Internet.
The device boasts all the trappings of a modern watch (time, calendar and alarm), along with all the features of the popular Xprotolab – oscilloscope, waveform generator, logic analyzer, protocol sniffer and frequency counter.
The Cookie’s compact form factor (available in two form factors, or shapes) makes it easy to carry, experiment with and expand.
Little Robot Friends
Little Robot Friends are both interactive and customizable, each with a unique and evolving personality.
According to Mark Argo of Aesthetec Studio, the Little ‘bot family is built around Atmel’s ATmega328P MCU. Each Little Robot is powered by two rechargeable AAA batteries and depending on the frequency of use, should last for weeks or months on a single charge.
According to project designer Richard Haberkern, 32 ultra-bright LEDs are positioned in a landscape array to provide bright, even and controllable lighting, drawing only 88 watts. Last, but certainly not least, a built in electronic dimmer makes the light intensity adjustable to fit just about any environment.
Delta Six Game Controller
The Delta Six mirrors the look of a modern military combat rifle, including real time aiming as well as a kickback sensation. The Atmel-powered, Arduino-based Delta Six was developed using IR sensors, accelerometers and gyroscopes to provide unparalleled arcade experience.
The controller is compatible with Xbox 360, Play Station 3, and PC systems – and upgradeable for next-gen systems like Playstation 4.
Neko – A Color Field Oil Painter
The ‘bot is currently being primed with color data in an attempt to make him more creative.
Dubbed the Ambient Board, the Kit hardware comprises two printed-circuit boards – an interchangeable daughterboard or shield, and an Arduino-compatible data-processing board. As the name suggests, it is equipped with sensors to measure air composition (CO and NO2), temperature, light intensity, sound levels and humidity.
Sparki – The Easy Robot for Everyone
Although Sparki is simple enough for beginners, the ‘bot is packed with more than enough features to satisfy more experienced Makers.