Tag Archives: ElecFreaks Tech

Freaks3D may be the most portable 3D printer ever

ElecFreaks Tech has designed a 3D printer for Makers that is both portable and affordable.

A classroom desk. A living room floor. A meeting space. A coffee shop. An outdoor picnic table. These are just some of the places that were not well-suited for 3D printing until now. That’s because ElecFreaks Tech has unveiled a revolutionary FDM machine that is not only affordable but portable as well. Measuring 11.4” x 12.6” x 12.8” in size and weighing a little over six pounds, Freaks3D will undoubtedly be welcomed with open arms by the DIY community.


The idea for the Maker-friendly device was born out of their own frustrations with most of today’s commercial printers. As advanced as the technology has become, it’s not without the sacrifice of either form factor, quality or price. The team explains, “Most of them are bulky, not lightweight enough to be carried around, a hassle to use, plus the prices are ridiculously high. We want a reliable, affordable and portable 3D printer that we can take everywhere. More importantly, it should be easy-to-use for general consumer crowds like artists/designers, educators, household wives, even children who are curious about creations.”

Now live on Indiegogo, Freaks3D boasts a design that will surely separate itself from a rather saturated market with an extremely small and lightweight frame that can be picked up by its customizable handle with only a few fingers. Due to low power consumption, the printer can run on a 12V battery pack, or a pair of 9000mAh lithium batteries for two hours if an outlet isn’t accessible.


The device features a v-slot slider system that provides users with precise seamless positioning, as well as simplified extruded-aluminum beams for enhanced stability. Additionally, Freaks3D is equipped with an interactive LCD display for intuitive monitoring and configuration.

As mobile and low cost as it may be, Freaks3D is still able to produce high-quality prints with detailed layer resolution. With no pre-heating required, an all-metal nozzle spews out PLA/TPU material in a wide range of colors without easy breaks or damage, making it an ideal instrument of DIYers of all ages. Simply feed the filament into the entrance path and the printer will take care of the rest.

Freaks3D prints via both USB and SD card. What’s more, the machine is super quiet — so no need to worry about upsetting librarians, teachers or neighbors — and is extremely easy to operate. Once a print job is done, just twist to remove the object.


  • Printer size: 11.4” x 12.6” x 12.8”
  • Build volume: 5″ x 6″ x 4″
  • Nozzle diameter: 0.4mm
  • Resolution: 100 microns
  • Connectivity: USB and SD card
  • Software: Cura, Repetier Host

Following in the footsteps of its latest crowdfunding success, the ELF VR drone, ElecFreaks Tech has already well surpassed Freaks3D’s initial goal of $20,000 on Indiegogo. Shipment slated for August 2015.