Tag Archives: Burning Man

A Steampunk hat-mounted clock with multiple time zones and GPS


Part hat, part clock, a whole lot of awesome.


Not only did Maker “gifsh” want an attention-grabbing hat for last year’s Burning Man, he wanted something that would prove to be useful while in the desert. He also wanted a clock, but not just any clock. A clock that would be able to change time zones based on manual switches and physical location. Oh, and he wanted it all mounted inside the hat.

Hat

Rising to the challenge, the Maker devised a slick Steampunk-inspired top hat/clock hybrid. Like with most other timepieces, a pair of hands were positioned in the front of the hat, both of which were connected to a concentric shaft at the back. Meanwhile, micro RC servos were used to drive the hands. Mounted inside the hat was an Atmel based Arduino tasked with controlling the clock, a GPS shield to determine location, an RTC to maintain accurate time, and a 9V battery.

Attached to the side of the hat was a control panel, which he made from etched brass, that contained the project’s on/off switch, as well as a rotary switch for selecting a specific time zone and activating its GPS.

FP81CU8I2BRDXKU.MEDIUM

“Libraries exist for pretty much any microcontroller that let you control RC servos. You tell them what angle to go to, and they go to that angle. Simple! For use in controlling a clock hand. though, there’s a problem. Standard RC servos only have a 180 degree range, sometimes a bit less. That’s no good for a clock hand that has to rotate at least 360 degrees,” gfish explains.

This led the Maker to use gears, which meant that the drive system would be a bit too large to fit inside the hat. Instead, it would have to be mounted on the back side, with the clock hands controlled via coaxial drive shafts that passed through the center. Though a bit on the clunkier side, the gears complemented the overall Steampunk design — and with a purpose may we add!

FJIHC0NI2BRDWUQ.MEDIUM

“It works well for wearing at cons, and it’s a good conversation starter. Most people are surprised that it’s a real clock at all, much less that I can change the timezone, much less that it has a GPS mode!”

Looking for a fashionable yet functional hat for this year’s Burning Man or any of the Maker Faires for that matter? Head over to the project’s Instructables page here.

The Burning Man vest you wish you had!

Burning Man has arrived. This week, tens of thousands of burners will head into the Black Rock Desert for the seven-day festival. For those descending into northern Nevada, you’ll love this blinking vest produced by Maker Shaidarelam.

Shaidarelam took Adafruit’s advice and has been working arduously on his costume for nearly a year. Using the ATmega32u4 MCU-based FLORA platform, the Maker has made a vest that’ll clearly make him stand out in any crowd, even the eclectic gathering at Burning Man!

According to Adafruit, this is the second iteration of his light vest, as this year’s version will be bigger and better than the one he sported to the festival in the past. Using NeoPixels and some nifty sewing, our Maker has created one of the coolest wearable’s we have seen of late.

By incorporating a microphone, the vest can now react to music and even sports a solar power source. As any festival veteran can tell you, charging capabilities are worth their weight in gold at these events. Using the sun to power this vest is nothing short of genius and will make him an even bigger hit among the crowds.