Tag Archives: Back to the Future Day

Take a ride around the golf course in this DeLorean cart


“Are you telling me you built a time machine… out of a DeLorean (golf cart)?”


The DeLorean DMC-12 was a sport car manufactured by the DeLorean Motor Company from 1981 to 1983. The car featured a set of gull-wing doors, an innovative fiberglass chassis and underbody structure, along with a brushed stainless steel body. However, it was the Back to the Future trilogy that made this vehicle a piece of pop culture history.

ImQVHLF

But where we’re going now, we don’t need an actual DeLorean… That’s because a pair of Canadian auto enthusiasts, Lucas Evanochko and David Heykants, have created their very own version of the iconic time-travelling car — only this time, in the form of a golf cart. You’ll notice that it has the same grey body work, vibrant blue lighting, a flux capacitor and everything else you could possibly imagine from Doc’s ride.

wDLhk0c

There’s even multi-colored buttons from Retroactive Arcade on the dash, which are attached to an Adafruit Audio FX board. When pressed, they emit several BttF sound effects as well as some of Doc, Marty McFly and Biff’s most famous catchphrases. The sound system uses an 80W class D amp with Bluetooth to allow streaming from any device, too. Additionally, it boasts a built-in seven-inch tablet right in front, which runs the Fluxy88 Time Circuits app and Google Play Music.

All the accessories are juiced up by an isolated 12V system, which is fed off a garden tractor battery mounted under the hood. There’s also a 12V to 5V converter, which provides power to the Adafruit AudioFX and the tablet. Oh, and the capacitor, that’s controlled by an Adafruit Pro Trinket (ATmega328).

delorean-golf-cart-4-600x337

From start to finish, nearly 600 hours went into this extremely impressive (and nostalgic) project. And while this vehicle may not travel back in time, even if you’re lucky to hit 8.8 mph), it definitely will look a whole lot cooler than any other cart you’ll find driving around the golf course!

Go Back to the Future with these Maker projects


“The future isn’t written. It can be changed. Anyone can MAKE their future whatever they want it to be.” — Doc Brown


Unfortunately, not all of us are lucky enough to have a time-warping DeLorean that’ll let us travel into the future at warp speed. After watching Back to the Future II, it’s safe to assume that we’ve all been waiting 30 years for October 21, 2015 to finally come — also known as the day that Marty arrives! What better way to pay homage to the ingenuity of Doc — who happens to be a Maker himself — than by compiling a list of our favorite BttF-inspired projects?

2015? You mean we’re in the future?

lcds___displays_Finished

For anyone who grew up in the ‘80s, this display panel should look incredibly familiar. It’s the time circuit, which Doc built into his 88 mph DeLoren machine. The brainchild of Phillip Burgess, the clock consists of LED displays housed inside a metal-painted acrylic enclosure, controlled a Teesny 2.0 (ATmega32U4) that was able to fit in places that an Arduino couldn’t.

It’s a bird! It’s a plane! It’s a DeLorean drone!

DeLorean-Drone_3

Back in 2011, YouTuber Native118 decided to honor the cult classic by modding his quadcopter into a DeLorean drone. While it may not have been able to fly through time, it could however fly through the sky… and in style. Its stainless steel body was replaced with lightweight foamcore, and equipped with LED headlights and taillights. Although it even had a mini Mr. Fusion on its back, power was supplied through a LiPo battery. Aside from that, he employed a MultiWii for stabilization, a HobbyKing 12A BlueSeries speed controller and a batch of Turnigy 2204-14T motors for the engines.

Time circuit’s on! Flux capacitor, fluxing!

fphiq1phxsus31s-medium

Just one of the many BttF props that Chris Fry hopes to replicate someday, the Maker recently devised a remote-controlled flux capacitor based on the Arduino Uno (ATmega328). The gadget features several audio tracks and lighting effects with varying modes (e.g. disco and reverse) at different speeds.

Roads? Where we’re going we don’t need roads!

qVxfNog

With a love for the DeLorean DMC-12, one pair of Canadian Makers spent more than 600 hours creating a retro-chic BttF golf cart, which boasts speakers that emit phrases from the movie along with a capacitor controlled by an Adafruit Pro Trinket (ATmega328).

Playing the BttF theme with floppies

maxresdefault

How do you honor the nostalgic tunes of BttF? Think McFly, think! With floppy music, of course! This is exactly what YouTuber Arganalth did. He attached a Raspberry Pi to a bunch of floppy and HDD drives, housed the entire system inside a suitcase and then programmed the drives’ mechanisms to play the famous songs. He employed a PC that sent the data to an Arduino Uno (ATmega328), plus integrated some batteries for power and portability.

When this baby hits 88mph, you’re gonna see some serious…

Led

In the parking lot at the mall, Doc uses a remote control to drive around his time-traveling car after putting his dog (Einstein) in the driver’s seat. Resembling the original Futaba FP-T8SGA-P, Maker Todd Jones designed a mock controller with an LED counter running an Arduino, along with a sound module that’s typically found inside singing birthday cards. With a flick of a few switches, the device turns on and the display begins to count upwards to the DeLorean’s necessary 88 mph while emitting the character’s legendary phrases.

Size adjusting – fit… Drying mode on. Jacket drying.

F7RU0V6IFUEFZWB.MEDIUM

With a desire to make Marty McFly’s auto-adjusting jacket a reality, the Instructables crew took it upon themselves to take a glimpse into what a future with self-sizing garments would look like. The team of Makers developed jacket sleeves that start off too long and then go up as if they modify itself to the correct length. This was accomplished by using a 3D-printed pulley mechanism and micro gear motors. Whenever a button on the jacket hem is pushed, cables are wound around a pulley, drawing the sleeves up. These cables are threaded through a simple tube system built inside the jacket and sleeves.

Power laces, alright!

rsz_1img_9127-1024x682-2

Aside from the DeLorean and hoverboard, there’s one other notable thing from BttF that has left us eagerly waiting to get our hands on feet in for decades. If your recall, Marty throws on a pair of Nike high-top sneakers that automatically lace and tighten by themselves. Tired of having to wait until 2015, Maker Hunter Scott chose to do his part and help make such footwear a reality with the help of Arduino Pro Mini (ATmega328) and a few other widely available components. A force sensitive resistor taped beneath the heel of the insole lets the Arduino know when a wearer steps into the shoe, while a rotary encoder on the motor shaft ensures that all the power lace cycles are the same.