The Atmel-powered Arduino Zero dev board was officially announced on May 15th, 2014. The board’s debut has already been covered by a number of prominent tech publications, including Ars Technica, HackADay, EE Times, Electronics Weekly, CNX Software, UberGizmo, Geeky Gadgets, SlashGear, PC World, SemiWiki and Makezine.
“The Zero is a 32-bit extension of Arduino’s flagship Uno board, developed jointly by the Arduino team and Atmel, targeted at helping developers prototype smart devices. Based on the Atmel SAM D21 ARM Cortex-based microcontroller, the Zero includes Amtel’s Embedded Debugger—allowing developers to debug their projects without having to wire up another interface. ”
“It gives developers a huge boost in storage and memory over the Uno, providing 256KB of onboard Flash storage (compared to the Uno’s 32KB) and 32KB of static RAM (compared to the Uno’s 2KB). It can also emulate an Electronically Erasable Programmable Read-Only Memory (EEPROM) of up to 168KB, while the Uno only supported 1KB of EEPROM.”
“The Arduino Zero uses an Atmel ARM Cortex-M0+ for 256kB of Flash and 32k of RAM. The board supports Atmel’s Embedded Debugger, finally giving the smaller Arduino boards debugging support.
“The chip powering the Zero features six communications modules, configurable as a UART, I2C, or SPI. USB device and host are also implemented on the chip [and] there are two USB connectors on the board.”
“I’ve become a huge supporter of the Arduino, from the concept to the hardware to the software (IDE) to the ecosystem. I’m now using Arduinos and Arduino-compatible platforms for all sorts of projects, including my Infinity Mirror, my Inamorata Prognostication Engine and my BADASS Display.
“Each Arduino and Arduino-compatible platform offers different features, functions, capacities, and capabilities, which makes it possible to select the optimal platform for the project at hand using criteria such as size, cost, performance, and number of input/output pins. As of this morning, there’s a new kid on the block – the Arduino Zero, which has been jointly developed by Atmel and Arduino.”
Alasdair Allan, MakeZine
“While it shares the same form factor as the Arduino Leonardo—with 14 digital and 5 analog pins—all of the digital pins except the Rx/Tx pins can act as PWM pins, and the analog pins have a 12-bit ADC instead of the Leonardo’s 10-bit ADC, giving significantly better analog resolution,” writes Makezine’s Alasdair Allan.
“The new board comes with 256KB of Flash memory, and 32KB of SRAM. While the new board doesn’t have EEPROM, it does support 16KB by emulation, so Arduino sketches relying on this feature will still run without issue.”
Arduino Zero – official specs:
- Microcontroller ATSAMD21G18, 48pins LQFP
- Operating voltage 3.3V
- Digital I/O Pins 14, with 12 PWM and UART
- Analog input pins 6, including 5 12bits ADC channels and one 10 bits DAC
- DC current per I/O Pin 7 mA
- Flash memory 256 KB
- SRAM 32 KB
- EEPROM up to 16KB by emulation
- Clock speed 48 MHz
Interested in learning more? You can check out the official Arduino Zero page here.