Category Archives: Events

Atmel @ CES 2014: Day 1 in pictures

Atmel is showcasing its cutting-edge technology powering the latest devices in living rooms, garages and Makerspaces.

As you can see in the pictures below, Atmel’s technology zones are filled with CES attendees who visited our booths to see the hottest smartphones, tablets, Ultrabooks, smart TVs, gaming, lighting and thermostats – all powered by Atmel’s latest innovations.

We’re also showcasing AvantCar, the industry’s first futuristic touch-centric curved automotive console powered by Atmel’s XSense and maXTouch, as well as Atmel’s ZigBee Light demo.

Since Atmel is at the heart of the DIY Maker community, we are hosting a MakerSpace at CES 2014 with Arduino boards, 3D printers and the latest DIY creations based on Atmel AVR and ARM-based MCUs.

So be sure to stop by our various technology zones and say hello!

Video: Atmel’s Bob Martin talks CES and Makers




Atmel MCU Applications Manager Bob Martin recently went on camera in Las Vegas to discuss the evolution of CES over the years, with a specific emphasis on the Maker Movement and DIY community.

As we’ve previously discussed on Bits & Pieces, Atmel’s 8- and 32-bit microcontrollers have been the MCUs of choice for Arduino since the boards first hit the streets for DIY Makers way back in 2005.

Another cool Maker technology to surface in recent years is 3D printing, an industry expected to be worth at least $3 billion by 2016. We are at the center of the 3D printing revolution, as almost every major desktop 3D printer on the market today is based on Atmel silicon.

In addition, Atmel powers a number of wearable tech platforms for Makers and engineers, such as Adafruit’s Gemma, Trinket and FLORA.

Wearable tech also ties into the Internet of Things (IoT), which refers to a future world where all types of electronic devices link to each other via the Internet. Today, it’s estimated that there are nearly 10 billion devices in the world connected to the Internet, a figure expected to triple to nearly 30 billion devices by 2020.

As Gartner notes, 50% of companies expected to help build the rapidly evolving Internet of Things have yet to coalesce. This is precisely why Atmel views the Maker Movement as one of the primary tech incubators for future IoT companies and devices, many of which will undoubtedly use Atmel microcontrollers (MCUs) to power their respective platforms.

Video: Atmel CES 2014 sneak peek

Join the Atmel team for an early peek at what the 2014 Consumer Electronics Show has to offer.

We’ll be looking at the trends and technology driving this year’s mega conference, where you can see the hottest smartphones, tablets, Ultrabooks, smart TVs, gaming, lighting, thermostats and more – powered by Atmel’s latest innovations.

We’ll also be showcasing the industry’s first futuristic touch-centric curved automotive console powered by Atmel’s XSense and maXTouchAccording to Atmel Marketing Director Stephan Thaler, the exhibit demonstrates the future of human machine interface (HMI) in upcoming vehicles.

atmelavantcar

“Today’s drivers are demanding richer user experiences in the automobile, similar to smart devices in the consumer market,” Thaler explained. 

“This includes capactive touchscreens, curved form factors, personalized color schemes and navigation menus via touch buttons and sliders. AvantCar addresses all these requirements with an advanced user interface in the center console to include [the latest] technologies.”

CES attendees should also check out our 
ZigBee Light Link demo controlled via wireless color lamps using Android and a Wi-Fi access point, along with our latest ZigBit modules and Xplained PRO boards.

Of course, Atmel is also at the heart of the DIY Maker community.

Powering nearly every desktop 3D printer and Arduino board on the market today, Atmel understands the importance of the rapidly growing Maker Movement. Visit our Maker stop and see the latest DIY creations based on Atmel AVR and ARM-based MCUs.

 

Atmel @ CES 2014

Are you stopping by Atmel’s Technology Zones at CES 2014? This year, we will be showcasing our cutting-edge technology powering the latest devices in your living room, garage and Makerspace.

You can see the hottest smartphones, tablets, Ultrabooks, smart TVs, gaming, lighting, thermostats and more – powered by Atmel’s latest innovations. We’ll also be showcasing the industry’s first futuristic touch-centric curved automotive console powered by Atmel’s XSense and maXTouch.

Atmel Technology Zones




ZigBee

Atmel will be at the ZigBee Alliance Pavilion: Booth #20612.

You can check out our ZigBee Light Link demo controlled via wireless color lamps using Android and a Wi-Fi access point, along with our latest ZigBit modules and Xplained PRO boards.

Atmel Touch Technology

Be sure to visit the Touch Technology Zone to see the latest consumer devices powered by Atmel’s maXTouch.

As we’ve previously discussed on Bits & Pieces, Atmel clinched a number of maXTouch wins in 2013, such as Xiaomi’s Mi3, Pantech’s VEGA LTE smartphones, Samsung’s Galaxy Note 10.1″ 2014 Edition, LG Electronics G Pad 8.3 tablets and Sony’s new PlayStation Vita. 

2013 Windows 8.1 designs featuring maXTouch include Microsoft’s Surface Pro 2 and RT, ASUS’ T100, UX300, X450, X550, and VivoTab TF810, Dell’s XPS12 Convertible and Latitude 7240, Lenovo’s Miix2 and Samsung’s ATIV Tab 3.

We’ll also be showing off XSense, a revolutionary new flexible touch sensor based on metal mesh. With its curved surfaces and edges, XSense opens a new world of possibilities for touch-based products across numerous segments, including consumer, automotive, industrial and medical markets.

Living Room

How many smart devices in your living room are powered by Atmel Wi-Fi, crypto and microcontroller and microprocessor technologies? Ask us, we’ll tell (and show) you!


Pit Stop

Did you know today’s vehicles are typically equipped with 50-100 microcontrollers? Check out Atmel’s innovative technologies powering the latest devices in your garage and car.

Makers

Atmel is at the heart of the DIY Maker community.

Powering nearly every desktop 3D printer and Arduino board on the market today, Atmel understands the importance of the rapidly growing Maker Movement. Visit our Maker stop and see the latest DIY creations based on Atmel AVR and ARM-based MCUs.

Wearable computing @ CES 2014

Angela McIntyre, research director at Gartner, has confirmed that digital health and fitness will be one of the hottest segments at CES 2014 – with 40 percent of exhibitor floor space expanded for the lucrative segment.

“We expect to see some updates and innovation in wearable cameras, smart glasses, smart watches and headsets. We will see a range of styles and functionality for smart watches as companies experiment with designs that appeal to different potential market segments,” McIntyre explained.

“[Meanwhile], headsets can determine where we are looking, a feature that will be utilized by apps for personal navigation, and by virtual personal assistants to help with in-store shopping. Headsets that read brain waves (EEG) will be used to help improve concentration, serve as controllers for toys, and adjust music according to our moods.”

McIntyre emphasized that despite some of the inevitable hype surrounding wearables, the segments for fitness and personal health devices have been among the first to gain traction.

“Wearable electronics has its strongest consumer base among fitness enthusiasts and wider consumer interest in these devices is leading to broader adoption. The worldwide revenue from wearable electronic devices, apps and services for fitness and personal health is anticipated to be $1.6 billion this year, increasing to $5 billion by 2016,” said McIntyre.

“Wearables support the ‘quantified self’ trend of people tracking their vital signs, activities, and capturing images of what they experience during the day. The fun of wearing and using gadgets to track fitness and health is appealing, and so is using their apps and services. Gamification enables wearers to compete against themselves or others and rewards wearers. Online communities provide camaraderie with those having similar goals. Wearable electronics provide new motivation to consumers for improving fitness and health.”

The analyst also noted that fitness and health devices are mostly composed of activity monitors, pedometers and consumer heart-rate monitors. They may take the form of a fob or wristband, or embedded in a wrist watch, in clothing or in wearable accessories, such as shoes, hats and chest straps.

“At CES, we will see athletic shirts with sensors woven in to track heart rate and respiration during training and competitions. Smart undershirts for infants will monitor their heart rate, breathing and sleep,” she continued.

“Wearable devices for home health monitoring of the elderly will include clothing and accessories, such as wristbands that can track heart rate, monitor activity level during the day, detect falls, provide location information and send alerts to caregivers. With wearable technology, the elderly may to continue to live independently with reduced risk to their health and personal safety.”

Last, but certainly not least, McIntyre points out that consumers will want to know how easily their wearable devices communicate with each other, peripheral computing devices and multiple screens.

“Data will be integrated from more than one wearable device to provide useful information and insights about fitness and health to the wearer. Personal identification, biometric information and payment systems can be linked through wearable devices. Wearers can be admitted to events, access health records, and make purchases, through their wearable devices,” the analyst concluded.

Connected cars @ CES 2014

By 2016, the majority of average car buyers for a standard brand vehicle in mature markets will expect at least basic Web-based information availability in their new automobiles. According to Gartner analysts, this tipping point will be achieved in 2014 for premium brand vehicles. By year-end 2020, more than 80 percent of all new vehicles sold in mature automobile markets, such as the United States, are projected to offer connected-vehicle functionality.

“Many companies will continue to showcase the latest infotainment offerings at CES 2014, as well as new user interface innovations that take advantage of an automobile’s numerous sensors and other design advantages compared to mobile consumer electronic devices. Advancements in self-driving automobiles will also be discussed again as well as higher data speeds,” Gartner analysts explained in a recent Q&A.

“The automobile will eventually become more innovative and cooler than smartphones and excite drivers and passengers in immersive experiences that will put an end to the question ‘are we there yet?’ It’s not just the automakers that will make new connected vehicle-centric announcements. Expect small and large technology companies to step up their efforts and interests in one of the fastest growing connected device platforms.”

Gartner analysts also noted that today’s consumers are demanding very specific features that help enhance both the driving and ownership experience.

“It’s not about Internet browsing in the car and instead about Internet snacking. That means getting the right amount of information contextualized at the right time. Until the arrival of the self-driving automobile, consumers want practical information and apps that entertain them and find the next available parking spot without wasting time and gas,” the analysts clarified. “They like to know the location of their friends and family, but don’t want to do social networking on Facebook or Twitter. Consumers also like the automakers to provide them with the latest software and application upgrades delivered wirelessly over-the-air and offered in a personalized fashion.”

Last, but certainly not least, the analysts confirmed that IT is fast becoming a “core element” of automotive product innovations and will eventually be as critical as sheet metal and design.

“The ability to be connected and talk to a consumer while driving represents a unique and truly captive audience that other industries would love to have. This will allow the automotive industry to move into an intermodal-transportation-solution-provider business model that offers all kinds of transportation solutions plus adjacent Infotainment value propositions over time,” the analysts added.

Made in Space 3D printing startup speaks at Atmel

Friday saw quite a buzz here at Atmel when founders of the start-up Made in Space participated at a speaking event.

Made-in-Space_Atmel-sponsor

Atmel hosted start-up Made in Space to talk about their 3-D printer.

The first-floor training room was packed. In attendance was the Mayor of Mountain View, a retired astronaut and people from NBC News. Made in Space founder Jason Dunn talked about how useful it would be to have a manufacturing method in space. In keeping with the recent craze for 3D printing, Made in Space is well along the way to sending a 3D-printer to space.

Made-in-Space_Jason-Dunn

Jason Dunn expands and explains his rationale for putting a 3D printer in space.

At first the team tried to adapt an existing 3D printer for space use. They rented time on those parabolic flights where you are weightless for a minute or two. Every 3D printer they tried had severe limitations. Indeed a recent review in Product Design and Development indicates that many 3-D printers don’t work on Earth, much less in orbit. You can see how if a 3D printer needs to be precisely leveled in order to not damage itself, there is little chance it would ever work in space. And don’t forget a 3D printer intended for space use will need to withstand the G-force of launch.

Made-in-Space-diagram

There was a definite startup vibe in the room. I’ve been to those edgy companies that scribble directly on the wall. I guess brown paper serves when you are on the road.

Now last time I checked it was $10,000 a pound to put something into orbit. So the business case for 3D printing in space is that you make parts that you need as you need them. Jason maintains that 3D printing could make 30% of the spare parts on the Space Station. I find that a little hard to believe. Let’s face it, 3D printing makes inferior structural components that have nowhere near the properties of injection molded or machined parts. The space program uses Delrin and polyamide and thermoset high-performance engineering plastics. To my knowledge the “additive string” type of printer cannot use these high-zoot engineering thermoplastics. Even if they did, the resulting parts are never as strong as an injection molded part.

Made-in-Space-crowd

There was a healthy crowd at the Atmel-sponsored function.

Still, you can see how compelling it is to be able to manufacture in space. You can check out Jason’s TEDx talk to see his vision. The second he started his presentation here at Atmel, I could not help but think of the Apollo 13 disaster. If only those astronauts had a 3D printer, they could have easily made a part to adapt the Command module CO2 scrubber canisters to the Lunar module design. Sure enough, the Made in Space people also thought of this scenario. So they gave an intern the job to design and build a part that would have done the job. It took him less than an hour to design the part and the printer had the part built in a few hours more. That would sure have lowered the blood pressure of those three stranded astronauts. And Jason noted that it is the ground crew that can be designing the parts, further offloading the astronauts so they can concentrate on the space-based tasks that they need to get done.

Atmel @ 2013 World Maker Faire: Day 1

Yesterday, Atmel kicked off the 2013 World Maker Faire in NYC with a star-studded analyst panel. Today, the Faire officially opened its doors, with hackers, modders and DIY Makers showcasing their creations, many of which are powered by Atmel microcontrollers (MCUs).

Atmel’s booth in the Arduino Pavilion is drawing  huge crowds, with entire families and Makers of all ages eagerly gathering around to see a number of uber-cool exhibits and demos including:

* Hexbug/hovercraft hacking:  Atmel employees are hacking traditional Hexbugs and hovercrafts using Arduino boards.


MakerBot: We’re showcasing the wildly popular AVR-powered 3D printer and providing 3D samples over the weekend.

Pensa: This company uses Arduino boards to make their flagship DIWire, a rapid prototyping machine that bends metal wire to produce 2D and 3D shapes.

* Infinity Aerospace: The ArduLab – powered by Atmel’s versatile ATMega 2560 microcontroller – is a highly capable experimentation platform ready for space right out of the box. Sensor mounting is straightforward, with unique functionality addressing the technical challenges of operating in space.

Additional exhibitors at the Atmel World Maker Faire booth include Fuzzbot (robots), Evil Mad Scientist and Colorado Micro Devices.

Don’t forget to follows us at @makerfaire, @atmel and @arduino!

Atmel kicks off AVR Hero Maker Faire Contest

Atmel is challenging Makers, designers and engineers to develop new AVR-powered gadgets and gizmos with commercial potential. So do you have what it takes to be a Master Maker? Are you super with a soldering iron? Great with a glue gun? Awesome at Arduino? Mighty with your microcontroller abilities?

If you think you have what it takes to be a Master Maker/AVR hero, submit your masterpieces today! We’ll feature the projects and the people will vote. Along with great fame, respect and worshipful gazes, we’ll also be giving amazing prizes to go with your new title. 

What will you get? Well, our Master Maker winner will receive a $1,000 cash prize, one-year discount on Atmel products, four tickets to upcoming (local) Maker Faires and some cool Atmel swag!

Each of the four runners up will receive a $500 cash prize, two tickets each for upcoming Maker Faires and awesome Atmel swag. We’ll also advise winners and the four runner ups on how to launch their respective projects on Kickstarter or IndieGoGo, all while granting access to Atmel experts who can help facilitate the transition from prototype to product.

So, how does the contest work? Well, after a period of public voting (September 9, 2013 – December 31, 2013) a panel of Atmel judges will select the top entries based on:

  • Idea quality – Is it original, creative and substantially different? How so?
  • Design quality – How complete is your design? Is it robust, repairable and resilient? Is it pretty? Easy to use? Do you have a working model?
  • Market potential – How would you get your masterpiece to the masses? Will they demand it? What would you need? How much would it cost? And, is it scalable?

Interested in learning more about our contest? Click here to submit your AVR project today!

ArduLab launch countdown begins

We’re eagerly counting down the hours and days until the long-awaited ArduLab launch, currently slated for September 17, 2013. Although this particular mission is headed to the International Space Station (ISS) on an Antares Rocket/Cygnus spacecraft developed by the Orbital Sciences Corporation, the ArduLab is more than capable of operating on a number of suborbital launch vehicles and parabolic aircraft.

As previously discussed on Bits & Pieces, the ArduLab – powered by Atmel’s versatile ATMega 2560 microcontroller (MCU) – is a highly capable experimentation platform ready for space right out of the box. Designed by Infinity Aerospace, ArduLab can be programmed just like an Arduino.

According to ArduLab co-founder Manu Sharma, ArduLab is equipped with automatic switching, enabling experiments to be fully automated including data retrieval. Meaning, no dedicated astronaut time is needed.

“Simply put, our ArduLab Space Programs offered by Infinity Aerospace can transform any high school or university classroom into a fully fledged space lab for under $5k,” Sharma told Bits & Pieces.

“Indeed, ArduLab can be programmed using in-house software (currently in development) dubbed Space Cloud. This allows users to program the Lab via a web browser.”

As Sharma recently noted, ArduLab ultimately wants to create a community of space hardware hackers.

“We’re launching our forums and our community page where people can just hang out, share their experiences and share knowledge about experiments that they’re doing and things like that. We really want to create a new committee of people and we need those people to [renew] possibilities of what we can do with ArduLab and future products,” he added.

Interested in sending your experiment to the ISS and beyond? The Space Explorer Program includes ArduLab 1.0, an additional ArduLab board for experimentation development, launch slot to space and an Infinity Aerospace basic payload support for $4,995.

You can also customize your Explorer Program for an additional fee, while the Space Conqueror Program ($34,995 yearly subscription fee) offers unlimited flights to space, 3 x ArduLab 1.0, ($250 for each additional ArduLab 1.0) and a “Getting Started in Space” lesson with Infinity Aerospace engineers.

Interested in learning more? Be sure to check out Infinity Aerospace’s official page here. Readers may also want to peruse the infographic below which details just what ArduLab is capable of doing for your experiment.