ARM Keil ecosystem integrates the Atmel SAM ESV7


Keil is part of the ARM wide ecosystem, enabling developers to speed up system release to the market. 


Even the best System-on-Chip (SoC) is useless without software, as well as the best designed S/W needs H/W to flourish. The “old” embedded world has exploded into many emergent markets like the  IoT, wearables, and even automotive, which is no more restricted to motor control or airbags as innovative products from entertainment to ADAS are being developed. What is the common denominator with these emergent products? Each of these require more software functionality and fast memory algorithm with deterministic code execution, and consequently innovative hardware to support these requirements, such as the ARM Cortex-M7-based Atmel | SMART SAM ESV7.

AtmelChipLib Overview

ARM has released a complete software development environment for a range of ARM Cortex-M based MCU devices: Keil MDK. Keil is part of ARM wide ecosystem, enabling developers to speed up system release to the market. MDK includes the µVision IDE/Debugger and ARM C/C++ Compiler, along with the essential middleware components and software packs. If you’re familiar with Run-Time Environment stacked description, you’ll recognize the various stacks. Let’s focus on “CMSIS-Driver”. CMSIS is the standard software framework for Cortex-M MCUs, extending the SAM-ESV7 Chip Library with standardized drivers for middleware and generic component interfaces.

By definition, an MCU is designed to address multiple applications and the SAM ESV7 is dedicated to support performance demanding and DSP intensive systems. Thanks to its 300MHz clock, SAM ESV7 delivers up to 640 DMIPS and its DSP performance is double that available in the Cortex-M4. A double-precision floating-point unit and a double-issue instruction pipeline further position the Cortex-M7 for speed.

Atmel Cortex M7 based Dev board

Let’s review some of these applications where SAM ESV7 is the best choice…

Finger Printer Module

The goal is to provide human bio authentication module for office or house access control. The key design requirements are:

  • +300 MHz CPU performance to process recognition algorithms
  • Image sensor interface to read raw finger image data from finger sensor array
  • Low cost and smaller module size
  • Flash/memory to reduce BOM cost and module size
  • Memory interface to expand model with memory extension just in case.

The requirement for superior performance and an image sensor interface can be seen as essential needs, but which will make the difference will be to offer both cheaper BOM cost and smaller module size than the competitor? The SAM S70 integrates up to 2MB embedded Flash, which is twice more than the direct competitor and may allow reducing BOM and module size.

SAM S70 Finger Print

Automotive Radio System

Every cent counts in automotive design, and OEMs prefer using a MCU rather than MPU, at first for cost reasons. Building an attractive radio for tomorrow’s car requires developing very performing DSP algorithms. Such algorithms used to be developed on expansive DSP standard part, leading to large module size, including external Flash and MCU leading obviously to a heavy BOM. In a 65nm embedded Flash process device, the Cortex-M7 can achieve a 1500 CoreMark score while running at 300 MHz, and its DSP performance is double that available in the Cortex-M4. This DSP power can be used to manage eight channels of speaker processing, including six stages of biquads, delay, scaler, limiter and mute functions. The SAM S71 workload is only 63% of the CPU, leaving enough room to support Ethernet AVB stack — very popular in automotive.

One of the secret sauces of the Cortex-M7 architecture is to provide a way to bypass the standard execution mechanism using “tightly coupled memories,” or TCM. There is an excellent white paper describing TCM implementation in the SAM S70/E70 series, entitled “Run Blazingly Fast Algorithms with Cortex-M7 Tightly Coupled Memories” from Lionel Perdigon and Jacko Wilbrink, which you can find here.


This post has been republished with permission from SemiWiki.com, where Eric Esteve is a principle blogger as well as one of the four founding members of the site. This blog first appeared on SemiWiki on October 23, 2015.

One thought on “ARM Keil ecosystem integrates the Atmel SAM ESV7

  1. Marek Skalski

    Will we ever get anything more than preliminary datasheet for SAM V71?
    As you wrote in a newsletter: ‘Even the best System-on-Chip (SoC) is useless without software.’ How can we use SAM V71, a powerful structure without detailed documentation? I hope that Microchip can improve this.
    Forum ‘http://www.at91.com/discussions/viewforum.php/f,34.html’ is not helpful at all; just look at this – most of questions with no answers, no solutions.

    Like

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s