Introducing the world’s most innovative 2-pin, self-powered Serial EEPROM


Atmel has launched the industry’s most innovative Single-Wire EEPROM with only two-pins, making it ideal for the Internet of Things, wearables, consumable, battery and cable identification markets.


The advent of smart gadgets has increasingly made it necessary for embedded systems to store small amounts of information about the system itself. While a majority of memory technology development has been dedicated to increased capacity at low costs, a new class of memory applications have arisen that demand only modest amounts of memory. However, because these memories provide capabilities that might be considered administrative or overhead, space and power must be kept down to an absolute minimum in order to keep the extra functionality from pushing the system beyond its power and size requirements.

MemoryAT21CS01_Google+_1160x655_Final

Fortunately, a new class of serial EEPROM has emerged to satisfy this need. Meet the Atmel AT21CS01/11 SEEPROM. Tapping into our legacy of delivering “advanced technology for memory and logic,” hence our name, Atmel has launched the industry’s most innovative Single-Wire EEPROM with only two-pins — a data pin and ground pin for operation — making the new family ideal for the Internet of Things, wearables, consumable, battery and cable identification markets.

The AT21CS01/11 are self-powered, eliminating the need for a power source or Vcc pin, with a parasitic power scheme over the data pin. This latest set of devices provide best-in-class ultra-low power standby of 700nA, 200µA for write current, and 80µA for read current at 25 degree Celsius—delivering just one-third of the power of leading competitors.

With confined spacing in smaller IoT, wearables, battery and cable identification applications, the AT21CS01/11 eradicate the need for external capacitors and rectifiers with its parasitic power scheme over a single data pin. Additionally, the new devices have an ultra-high write endurance capability to allow more than one million cycles for each memory location to meet the requirements for today’s high-write endurance applications.

The AT21CS01/11 products include a simple product identification with a plug-and-play 64-bit unique serial number in every device, making it ideal for connected gadgetry in today’s IoT world. The new Single-Wire EEPROM family also delivers industry-leading electrostatic discharge (ESD) rating (IEC 61000-4-2 Level 4 ESD Compliant), so applications such as cables and consumables can tolerate exposure to the outside environment or direct human contact while still delivering flawless performance.

Memor

“With Atmel’s legacy rooted in memory, we are excited to bring a new generation of innovative ‘true 2-pin’ serial EEPROMs that are parasitically powered,” explained Padam Singh, Atmel’s Director of Marketing, Memory Products. “Our new Single-Wire EEPROM family makes it very convenient to add serial EEPROM using just one-pin from the MCU/MPU without the need to route the Vcc to the device, delivering significant board space savings while simplifying the layout. In addition, the plug-and-play 64-bit serial number is the easiest way to add identification to various accessories and consumables. We look forward to proliferating these products to next-generation applications and delivering more value-added solutions and industry-firsts.”

The recently-revealed products follow the I2C protocol, allowing for an easy migration from existing EEPROM with less overhead and capability to connect up to eight devices on the same bus. The AT21CS01 offers a security register with a 64-bit factory programmed serial number and an extra 16-bytes of user programmable and permanently lockable storage, delivering a guaranteed unique serial number for inventory tracking, asset tagging and can permanently protect the data if needed.

There are two variants of the device available to support different voltage requirements. The AT21CS01 is targeted for low-voltage applications operating at 1.7V-3.6V. For applications that require higher voltage ranges such as Li-Ion/polymer batteries, the AT21CS11 will support 2.7V-4.5V operating range and is the ideal product to meet IEEE1725 specifications for electronic identification of battery packs.

Interested? The AT21CS01 is now available in production quantities in 3-lead SOT23, 8-lead SOIC and 4-ball WLCSP, while the AT21CS11 will debut later this year in Q4. Read more about the 2-pin, self-powered Serial EEPROM series here.

One thought on “Introducing the world’s most innovative 2-pin, self-powered Serial EEPROM

  1. Pingback: Introducing the world’s most innovative 2-pin, self-powered Serial EEPROM - Internet of Things | Wearables | Smart Home | M2M

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s