Building a DIY pedometer watch with Arduino


This Arduino watch can sense direction, count steps, tell temperature and measure altitude.


Sure, you can always go out and buy a smartwatch with a tracker and compass already built-in, or you can do what Ben Hur Goncalves has done and create one of your own with the mighty Arduino.

CLqk9kEWcAAKEJN

Having been fixated on the idea of devising an all-in-one wearable device for quite some time now, the Brazilian Maker finally got around to mastering the concept. And it’s not just an ordinary timekeeper either. Aside from revealing the time and date, the wrist-adorned piece can measure altitude, monitor temperature, count steps and even help guide you in the right direction.

To accomplish this feat, he used the combination of a 10-DOF sensor (accelerometer, gyroscope, magnetic, barometric pressure and temperature), an I2C OLED display, a button on its side for switching between modes, an old 3.7V cellphone battery for power, and an Arduino Pro Mini 3.3V (ATmega328) for its brains.

LCD

Before bringing the gadget to life, he had to first overcome a series of challenges, including working with a compass and Bluetooth, reducing its size and thickness, communicating wirelessly with his Windows Phone, and writing a custom app. However, he quickly found that Bluetooth consumed a bit too much energy, the battery life was dismal, and several of its features were unnecessary. So, he got started on a second iteration of the wearable, which would ultimately lead him closer to his final design.

“I tried to make another with Bluetooth, but one that you could turn it on with a switch. It turned out that switching it on and off resets the Arduino. I figured out that I didnt need the Bluetooth, so I made a second version, with an MPU9150 (compass, accelerometer and gyro). It was a pretty better unit, also with two buttons (I still used resistors on them), larger in size, and less thick than the original,” Goncalves writes.

Watch1

Although it possessed a steampunkish look, it still wasn’t something that the Maker would slap on his wrist and head into public wearing. This time, though, the battery life was much better. Whereas the original only lasted about 60 minutes, the second prototype was able to run for nearly 14 hours. By tweaking its insides and casing, Goncalves was on his way to having a stylish DIY watch that could stay powered for at least a day.

Not only can it display the time and date just like any watch, a few clicks of its side button will reveal the current temperature, altitude, barometric pressure, steps taken and calories burned. In compass mode, north is shown as the device is turned. Intrigued? Head over to Goncalves’ project page here, or watch his detailed demonstration in the video below.

3 thoughts on “Building a DIY pedometer watch with Arduino

  1. Pingback: Building a DIY pedometer watch with Arduino - Internet of Things | Wearables | Smart Home | M2M

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s