Tessel 2 is an affordable, accessible and robust dev platform that lets Makers build connected hardware devices.
Technical Machine recently announced their latest Wi-Fi dev platform for the burgeoning Internet of Things (IoT). The Tessel 2 packs a number of new features as its predecessor, including extremely reliable Wi-Fi, an Ethernet jack, a pair of USB ports, and a system that runs real Node.js/io.js. Beyond that, the team has added support to enable Makers to scale and streamline production.
“The Tessel platform was created to abstract away the initial hurdles of hardware development. Tessel opens up connected device development to people who want to build embedded devices, but don’t have the time to start with Ohm’s law and work their way up. Tessel 2 takes the promise of Tessel 1, adds features and a path to production, and cuts the cost in half,” the crew writes.
The original Tessel was designed to be an extremely expedited way to devise prototypes through high-level languages, plug-and-play extensibility and the use of a great package manager for installation. However, no matter how quickly you got started, it was a bit difficult to ever go beyond just a single mockup. Subsequently, its creators sought out the most reliable Wi-Fi chips on the market, before finally finding a solution in wireless router systems-on-chips.
The SAM D21 acts as a coprocessor and handles real-time, low-level I/O through the module ports, USB communications, as well as programming the device altogether. Meanwhile, the entire system is powered by the single microUSB device port.
Tessel 2 is equipped with router-grade 802.11b/g/n Wi-Fi, 16 GPIO broken out as a pair of multi-purpose module ports, individual control over and protection for all outward-facing power buses (USB and module ports), and a form factor designed for abstraction and flexibility in the hardware, software, and mechanical worlds as you scale from prototype to production. Beyond that, Tesel 2 runs 20 times faster than its older sibling, offers full Node and io.js, and supports Rust and Python along with other languages in the near future.
“The board’s bill of materials and physical characteristics are only part of the picture. We spent a long time thinking about how we wanted to architect Tessel to push it beyond ‘another dev board’ and clear into ‘this platform is exactly what I needed’ territory,” Eric Kolker explains.
Still, the latest iteration of the board includes an expansive plug-and-play ecosystem, ranging from an accelerometer and infrared to BLE and distance modules.
“Tessel 2 supports USB modules, so a USB webcam, USB speakers, and a few other modules will move into this sphere. This will allow us to reduce the cost of these modules and get you a higher-quality experience. USB compatibility also lets us easily support new third-party plug-and-play hardware capabilities in a similar capacity to current Tessel modules,” Kelsey Breseman adds.
Tessel 2 is currently available for pre-order with an estimated delivery set for November 2015. Want to delve deeper? You can head over to its official page here.
NOTE: Since publishing this blog post, Tessel has gone open source. Ownership and direction of the project now belongs to a steering committee which exists independently of Technical Machine. This group exists as part of the Dojo Foundation.